The default IP address for 192.168. 188.1 wireless extender setup let the users install and configure their router for the home network to improve WiFi coverage and get good signal quality. The router usually works to allow people to access the wireless internet on their devices, so they can use the internet anywhere at home despite the location. If you don’t know the process of wireless router login setup, read this post. Here, you will find the easy steps and guidelines to complete the 192.168. 188.1 wireless router setup for your device. So, let’s proceed next and know more about the 192.168. 188.1 setup to do the task. 

How to Login to 192.168. 188.1 Wireless Extender?

• Turn on your computer. Make sure it gets a proper power supply. 

• After this, you need to open any preferred web browser on your computer. In the URL bar, you need to manually type the 192.168. 188.1/login and hit the Enter button. If this IP address does not let you reach the router login net page, you need to check the user manual to get the correct details.

• On the login page, you need to enter the username and password to connect to the router. If you don’t know the username or password, check the router manual or backside of the device. By default, the username and password both are ‘admin’. 

• In case the login error appears on the screen, you may have previously changed the default login details. If you don’t remember the details now, you can reset the router to its factory default.

Reset Username And Password

If you don’t remember the login details, reset the router to its default factory settings and recover the details you have lost. You can easily find the default username and password with the information above. In case, you are still unable to find the details, reset the router configuration. To reset your device, you need to press the ‘Reset’ button on your device. To press the button, you can use the pin or paperclip. Press the button, wait for a few seconds, and then release it. Now, you can use the default login credential for the router. 

Simple Steps for 192.168.0.1 Login to Router Setup

To log in to the router’s settings, you need to ensure that your device is connected to the appropriate network. With the default gateway IP address 192.168.0.1 login, you can easily access the settings of your router. If you want to do 192.168.0.1 login my account, follow the below instructions step by step to set up your router device without any trouble:

Step 1: Firstly, you need to establish a connection between the computer and router by using an ethernet cable.

Step 2: Boot up your system including router, router wifi setup, and broadband by turn it off and then on.

Step 3: After that, launch any updated web browser of your choice from your device.

Step 4: Type 192.168.0.1 login or http://192.168.0.1 in the URL bar of the web browser. Click on the enter button.

Step 5: After that, you will be navigated to the login page of your router device where you need to enter the username and password in the login credential page in respective fields.

Step 6: If you have not changed the username and password then enter the default username and password i.e., “admin”. You can also see the login details on the label attached with your router device.

Step 7: Once, you entered the username and password in the login credential page, click on the Login button.

Step 8: Now, you will be navigated to the configuration panel of your router. You can make the desired changes in your router device after assessing the setting page.

Step 9: Click on the Setup wizard to access the router setup wizard screen of your router.

Step 10: After that, your setup wizard will start detecting all the types of internet that you would have and ask to try and detect your connection type.

Step 11: Tap on the Next button to save all the settings made by you on your router device.

Step 12: Remember to not change the default setting of your router until the internet service provider gives you DNS information that needs to be configured.

Step 13: If you want to check whether your internet is connected or not, click on the router status which you found under the maintenance option.

Steps to Reset Password of Router Using 192.168.0.1 Login

Look at the below steps to reset the password of your router device by accessing the 192.168.0.1 login IP address. You need to follow all the steps carefully:

Step 1: Open any updated internet explorer of your choice from your system.

Step 2: Enter 192.168.0.1 login IP address in the URL bar of the web browser. After that, you will be navigated to the router login net setup window.

Step 3: Now, you have to enter the serial number of your router device. Click on the continue button to proceed further.

Step 4: After that, you will see a screen to reset the password of your router device.

Step 5: Enter the new password that you want to set and confirm it by entering it again.

Step 6: In the next step, you have to choose the security questions and answer them for security purposes. Click on the Next button to go ahead.

Step 7: Tap on the login button to log in to your router device with new login details.

Step 8: You have reset your router’s password successfully.

Make Necessary Changes!

With all the defined steps, you must be able to login. Also, there are troubleshooting steps in case you got stuck somewhere. So, after the successful login, it is required to make the necessary changes like changing the password or controlling the access if you want to take the real benefit with the private IP address i.e. http//192.168.1.1/login. This will not only limit the access for the hackers, but also you will have somewhere better speed than the previous settings. So, adopt these practices,and feel secure!